Fall Protection System

Swipe

Swipe down to learn more

Essential safety guard for technicians climbing up and down

All fall arresters are certified with EN 353-1 and the “Recommendation for Use” Vertical Group 11, CNB/P/11.073 and conform to Directive 89/686/EEC.

3S Lift provides rigid rail type and steel cable type fall protection systems. We have installed over 1 million meters of 3S Lift protection lines.

WTF-R/F Rigid Rail Fall Protection System

Constructed with high strength aluminum extrusion and seamless joint connection,

3S Lift rigid rail fall protection system can be installed onto any ladders or pole climbers.

  • WTF-R rail

  • WTF-83/10 rope

  • Introduction

  • WTF-F rail

Fall Protection System Specifications

Model: WTF-R

Guide rail type: inner card type guide rail

Applied fall arrester: SL-R50

Ladder: aluminum ladders and steel ladders

Max. Static load: 15 KN

Comply with standard: EN 353-1

Fall Protection System Specifications

Model: WTF-83/10

Safety wire rope: 8.3mm or 9.5mm

Applied fall arrester: SL-810S

With Shock Absorber: Optional

Install Tensioning type bottom installation bracket: Optional

Comply with standard: EN 353-1

Fall Protection System Specifications

Model: WTF-F

Guide rail type: external card type guide rall

Applied fall arrester: SL-F10

Ladder: aluminum ladders and steel ladders

Max. Static load: 15 KN

Comply with standard: EN 353-1

WTF-83/10 Wire Rope Fall Protection System

The WTF-83/10 wire tope fall protection system consists of lifting point, wire rope, tensioning device and wire rope clip. The wire rope is installed between the upper and lower lifting points, and the purpose of installing the wire rope clip is to avoid the rope swinging and damaging the climbing ladder.

  • SL-F10 Fall Arrester

    Arbitrary location installation

  • SL-R50 Fall Arrester

    Arbitrary location installation

  • SL-810S Fall Arrester

    Arbitrary location installation

  • WTL-A2 Anchor device

Fall Arrester Specifications

Model: SL-F10

The fall protection system type: WTF- F

Rated Load: 100 kg

Max. Static load: 15 kN

Installation position: Arbitrary location installation

Comply with standard: EN 353-1

Fall Arrester Specifications

Model: SL-R50

The fall protection system type: WTF- R

Rated Load: 100 kg

Max. Static load: 15 kN

Installation position: Arbitrary location installation

Comply with standard: EN353-1,ANSI A14.3,CSA Z359.2.1

Fall Arrester Specifications

Model: SL-810S

The fall protection system type: WTF- 83/10

Rated Load: 100 kg

Max. Static load: 15 kN

Installation position: Any position

Comply with standard: EN 353-1

Anchor device Specifications

Model: WTL-A2

Material: High quality carbon steel

Max. Static load: 22 kN

Installation position: Install the ladder at any position

Comply with standard: EN795:2012