 |
|
For giving access inside the tower we offer 3S Lift, profiting from the wire rope driving principle, they just run up and down the wire rope which is anchored on the top of the tower.
The service Lift is operated directly from the control panel with main switch, emergency stop, control buttons and indicator lamps for operation, faults and overload. 3S Lift has contactor control, dead-man circuit, monitoring switch for end of travel and emergency end position, sliding doors contact switch, etc. It is a personnel and/or materials lift and allows automotive travel for material transport between the end positions |
Driving the empty service-lift: Upward and downward travel is controlled from within the service lift in hand mode or from the outside in the automatic mode. For material transport or in order to collect a person, the service-lift can be sent to the top or bottom station by just push of a button. |
|
 |
|
 |
|
The lift motor and electric installation is placed at the top of the lift and the motor is easy to operate in case of an emergency. The power supply is facilitated via the electric cable. |
| 3S Lift can be guided by the ladder or by the wire ropes. Two guide wires on either side of the service lift prevent the lift from swing. The ladder guidance can provide a far better stability and simplified mounting, particularly low vibration, still riding by vulcanized rollers, and direct access to the ascending ladder by means of a second door. |
 |
At the top of the tower there are a suspension beam, which carries the motor wire and the safety wire (additional 2 guide wires for rope guidance). The wires are mounted in the basement of the tower and tightened with rigging screws. The wire length corresponds to the tower. |
| The cabin: Complete frame made of saltwater- resistant stainless steel profiles. The lift motor and electric installation is placed at the top of the lift. The design allows maximum space for transportation of people and tools. |
 |
 |
The lift operates independently of the safety ladder, once the lift could not work, the operators can leave the lift and directly access to the ascending ladder by means of a second door. |
|
